Description
Wet Output + Volume Poti Mod
The wet signal comes from a jack that will be mounted at the side of the Freeze.
Thereby, you can create marvelous soundscapes that make the Freeze sound even more fascinating.
An additional pot allows to control the volume of the wet signal.
The new output is only for the “Wet” signal, the original output remains (it delivers “Wet / Dry” or if you turn the original pot all the way down, you only have the “Dry” signal). With both jacks, you can run the wet and dry separately from the device via the two separate jacks. The volume pot controls the wet volume at the new “wet only” output.
After the pedal has been modded, you can still use both outputs or you can also connect the Freeze via the standard output jack. In this case, the Freeze works like before.
Thus, the mod can also be used to split the signal to two effect paths: one with the wet signal and the dry signal.
The EXH is not included in this offer. After sending your Freeze pedal to the DelayDude you will get your mods done. Your Freeze will be extensively tested for functionality after the modification. The pedal may respond differently in some setups after modification. Here, especially when using both outputs at the same time, the level might have to be corrected with buffers/boosters.
Price: 70,-€
External Remote Switch Mod
Via a jack that will be mounted at the side of the Freeze you can connect an external momentary switch (not included in the offer) to activate the Freeze function.
The external switch will operate like the standard switch which still can be used as well.
The remote switch mod allows to position the Freeze under your pedalboard or on any other hard-to-reach place.
By using a small remote switch, the Freeze effect can be activated. A click-free switch will furthermore avoid the disturbing noise of the Freeze standard switch.
Price: 49,-€
Choose your mods via the drop down menue.
